ComMarker B6 20W Fiber Laser Engraver vs Monport 20W Fiber Laser Engraver
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
ComMarker
$599
Monport
$349
Spec-by-Spec Comparison
| Spec | ComMarker B6 20W Fiber Laser Engraver | Monport 20W Fiber Laser Engraver |
|---|---|---|
| Wattage | 20 W | 20 W |
| Laser Type | Q-Switched | Q-Switched |
| Laser Source | Raycus | Raycus |
| Work Area (W) | 150 mm | 110 mm |
| Work Area (H) | 150 mm | 110 mm |
| Galvo Speed | 8000 mm/s | 7000 mm/s |
| Color Marking | No | No |
| LightBurn | Yes | Yes |
| Autofocus | Yes | No |
| Weight | 3.5 kg | 3.2 kg |
| Software | LightBurn + EZCad | BSLcad + LightBurn (galvo license required separately) |
| Pulse Width | N/A (Q-Switched) | N/A (Q-Switched) |
| Price | $599 | $349 |
| Rating | 8.0/10 | 6.5/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
ComMarker B6 20W Fiber Laser Engraver
Pros
- 150×150mm work area — 35% larger than the GWEIKE G2's 110mm field — fits tumblers on a rotary chuck and full knife blades without repositioning
- Autofocus eliminates manual Z-axis setup every session — the only 20W fiber laser with autofocus in the sub-$600 tier; every other machine in this range requires manual focus adjustment
- LightBurn confirmed working with EZCad also included — both workflows supported; buyers coming from diode lasers have immediate LightBurn continuity
- Built-in touchscreen display for settings and job status — removes the need to monitor a laptop during production runs
- 20W Raycus Q-switched marks steel, aluminum, brass, titanium, and copper consistently — ComMarker's production volume means quality control is verified across thousands of units
Cons
- Q-switched only — no color marking on stainless steel regardless of settings; for any color on tumblers or jewelry, the minimum step up is the OMTech 30W MOPA at $699
- No enclosure — Class 4 open-beam fiber laser; the invisible 1064nm infrared beam requires OD5+ eyewear and either a dedicated enclosure or a controlled workspace with no reflective surfaces
- Thinner community than GWEIKE — fewer Reddit threads and YouTube settings tutorials; troubleshooting depends more on ComMarker support channels than community knowledge
- Rotary not included — cylindrical tumbler marking requires a separate chuck or roller rotary attachment ($45–$65) on top of machine cost
Monport 20W Fiber Laser Engraver
Pros
- BSLcad bundled with LightBurn galvo support confirmed — no EZCad-only lock-in at $349; the Amazon listing explicitly says 'LightBurn Compatible'
- Raycus 20W source marks stainless steel, aluminum, brass, titanium, copper, and anodized aluminum consistently — the same source family used in machines twice the price
- Q-switched monochrome marks are deep and durable — serial numbers, logos, and ID marks survive heavy daily use without fading or rubbing off
- 110×110mm work area covers rings, dog tags, knife blade sections, and metal business cards without repositioning
- 3.2kg form factor is genuinely portable — moves between bench and jobsite without fixed infrastructure or dedicated workspace
Cons
- LightBurn setup on the BSLFiber controller is poorly documented — LightBurn forum (Jan 2025) rated Monport's galvo setup instructions 'horrible'; expect troubleshooting before first successful job
- 10,000mm/s galvo speed trails the GWEIKE G2's 15,000mm/s at $150 more — the speed gap is noticeable on high-infill designs and compounds significantly on volume work
- No color marking — Q-switched fixed pulse width cannot produce oxidation colors on stainless steel regardless of settings or software
- No autofocus — manual Z-axis height setup required for every material change or thickness variation; a friction point that dedicated color-marking workflows cannot absorb
- BSLcad community resources are nearly nonexistent — unlike GWEIKE or OMTech, no active forum threads, settings libraries, or YouTube tutorials specific to BSLcad workflows
Our Verdicts
ComMarker B6 20W Fiber Laser Engraver
The ComMarker B6 is the correct 20W pick when work area matters more than color capability. The 150mm field covers tumblers (with a rotary), full knife blades, and medium plaques that would require repositioning on a 110mm machine. Autofocus and the built-in display are genuine workflow upgrades over competitors at this price. If color marking is any part of your future roadmap, skip this machine — the B6 is Q-switched, and adding color capability later means buying a second machine. Buy the OMTech 30W MOPA at $699 instead. For monochrome marking on larger pieces with the most features in this tier, the B6 is the pick.
Monport 20W Fiber Laser Engraver
The Monport 20W is the honest answer when the budget ceiling is $400 and the use case is basic metal marking. LightBurn is supported (the 'EZCad-only' framing in older reviews is outdated), the Raycus source is legitimate, and the machine marks metals cleanly. The real tradeoff is everything that matters for efficient daily use: the GWEIKE G2 20W at $150 more runs 50% faster, has dramatically better documentation, and has an active community that has already solved the problems you will encounter. If $349 is a genuine limit, this gets the job done. If it is not, pay the extra $150 for the G2.