GWEIKE G2 20W Fiber Laser Engraver vs GWEIKE G2 Max 50W Fiber Laser Engraver
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
GWEIKE
$499
GWEIKE
$1199
Spec-by-Spec Comparison
| Spec | GWEIKE G2 20W Fiber Laser Engraver | GWEIKE G2 Max 50W Fiber Laser Engraver |
|---|---|---|
| Wattage | 20 W | 50 W |
| Laser Type | Q-Switched | Q-Switched |
| Laser Source | Raycus | Raycus |
| Work Area (W) | 110 mm | 150 mm |
| Work Area (H) | 110 mm | 150 mm |
| Galvo Speed | 15000 mm/s | 15000 mm/s |
| Color Marking | No | Yes |
| LightBurn | Yes | Yes |
| Autofocus | No | No |
| Weight | 2.5 kg | 6.5 kg |
| Software | LightBurn + EZCad2 | LightBurn + EZCad |
| Pulse Width | N/A (Q-Switched) | N/A (Q-Switched, 20–200kHz frequency range) |
| Price | $499 | $1199 |
| Rating | 7.8/10 | 7.8/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
GWEIKE G2 20W Fiber Laser Engraver
Pros
- LightBurn native at $499 — GWEIKE actively maintains their galvo driver; owners moving from diode lasers report zero learning curve on software setup
- 15,000mm/s galvo speed confirmed across all sources — 50% faster than the Monport 20W at $150 more; the throughput gap is measurable on any design with infill
- Raycus 20W source with documented reliability in knife-marking communities — a dedicated Italian cutlery review site (coltellimania.com, 14k views) independently validated the G2 for blade work
- 110×110mm work area covers rings, blade sections, small plaques, and coin marking without repositioning or compromising mark quality
- Active settings ecosystem: YouTube tutorials, LightBurn forum threads, and community settings libraries are indexed for the G2 specifically — problems you hit have been solved publicly
Cons
- Power-loss mid-job defect documented on LightBurn forum (June 2025) — mid-engraving power drop reported on some units; a workaround exists in settings but not every owner encounters it
- Customer service is WhatsApp-only with slow US response times — if something goes wrong, you are on your own until business hours in China; not viable for production-critical downtime
- Focus height calibration is poorly documented — community consensus is to calibrate by burn quality and sound rather than ruler measurement; GWEIKE's manual understates this complexity
- 110×110mm work area rules out tumblers and anything wider than a palm — if typical work pieces are over 100mm, step up to the ComMarker B6 (150mm field)
- No color marking — Q-switched laser cannot produce oxidation colors on stainless steel regardless of settings
GWEIKE G2 Max 50W Fiber Laser Engraver
Pros
- 50W Raycus fiber at 15,000mm/s is the highest wattage-speed combination in this price bracket — deep engraving to 5mm on metal is a documented standout capability no 30W machine at any price matches
- GWEIKE's LightBurn driver is the most actively maintained of any Chinese fiber laser brand — after the initial x/y axis calibration, LightBurn integration runs without the COR file gymnastics that ComMarker requires
- 150×150mm work area with 50W handles large plaques, long knife blades, and production batch runs on a single setup
- Active LightBurn settings ecosystem with a 37-material community settings pack (Etsy) specific to the G2 Max 50W covering metals, plastics, and stone
- 6.5kg portable form factor with detachable laser head — the same lightweight chassis as the G2 Pro 30W, not the heavy industrial frame you would expect at 50W output
Cons
- NOT a MOPA laser — earlier specs on this site incorrectly listed it as MOPA/JPT; it is a Raycus Q-switched fiber laser; no controllable pulse width, no MOPA-quality color marking libraries
- Calibration out of box requires x/y axis swap in LightBurn — documented by a verified owner (machinesformakers.com, Sep 2025); not a defect but a configuration step GWEIKE's documentation does not explain
- At $1,199 it costs $100 more than the ComMarker B4 60W MOPA — which has 60W, confirmed JPT MOPA source, and documented color marking libraries versus the G2 Max's 50W Raycus Q-switched
- Color marking is thermal oxidation, not MOPA — achievable on stainless and titanium with tuning but less consistent and less repeatable than a JPT MOPA; best-lasercutter.com explicitly notes this limitation
- No enclosure, no autofocus, and documentation rated poor by multiple owners — 50W Class 4 open-beam requires full PPE and a controlled workspace from day one
Our Verdicts
GWEIKE G2 20W Fiber Laser Engraver
The GWEIKE G2 20W is the best 20W entry-level fiber laser for a buyer who wants LightBurn from day one and values community documentation over price. At $499 it costs $150 more than the Monport 20W, and that premium buys a 50% galvo speed improvement, a driver that GWEIKE actively maintains, and a community that has already solved the problems you will encounter. The constraint is the 110mm work area: sufficient for jewelry, knife sections, and small items, but not for tumblers or anything wider. If work fits in 110mm and you want the smoothest entry into fiber, this is the pick. If work area matters, pay $100 more for the ComMarker B6 at 150mm.
GWEIKE G2 Max 50W Fiber Laser Engraver
The GWEIKE G2 Max 50W is the right machine when deep engraving speed is the priority and color marking consistency is secondary. At 15,000mm/s with 50W, it outpaces every other machine in this price range for batch deep engraving — knife blades, 3D grayscale on metal, and production-speed serial marking. It is not a MOPA laser (an error corrected from earlier data — it is Raycus Q-switched), and at $1,199 you are paying $100 more than the ComMarker B4 60W MOPA, which has more documented color capability and a confirmed MOPA source. If deep engraving speed is the use case, G2 Max wins. If color marking is the priority, the ComMarker B4 60W MOPA is the correct buy.