ComMarker B4 60W JPT MOPA Fiber Laser vs ComMarker B6 20W Fiber Laser Engraver
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
ComMarker
$1099
ComMarker
$599
Spec-by-Spec Comparison
| Spec | ComMarker B4 60W JPT MOPA Fiber Laser | ComMarker B6 20W Fiber Laser Engraver |
|---|---|---|
| Wattage | 60 W | 20 W |
| Laser Type | MOPA | Q-Switched |
| Laser Source | JPT | Raycus |
| Work Area (W) | 175 mm | 150 mm |
| Work Area (H) | 175 mm | 150 mm |
| Galvo Speed | 10000 mm/s | 8000 mm/s |
| Color Marking | Yes | No |
| LightBurn | Yes | Yes |
| Autofocus | No | Yes |
| Weight | 5.5 kg | 3.5 kg |
| Software | LightBurn + EZCad2 (LightBurn requires COR file setup) | LightBurn + EZCad |
| Pulse Width | 2–500ns | N/A (Q-Switched) |
| Price | $1099 | $599 |
| Rating | 9.0/10 | 8.0/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
ComMarker B4 60W JPT MOPA Fiber Laser
Pros
- JPT M7 MOPA source confirmed — wider frequency range (1–4,000kHz) and tighter pulse consistency than Raycus Q-switched alternatives at any price; the datasheet comes in the box
- 60W output at up to 10,000mm/s makes batch tumbler marking and production jewelry engraving run at business-viable throughput — no other LightBurn-compatible MOPA under $1,100 offers this combination
- LightBurn compatible via COR file — both LightBurn and EZCad2 workflows supported; JPT M7's full pulse-width parameter range is accessible from LightBurn's galvo interface once configured
- Rust cleaning at 60W is a documented bonus capability — removes surface oxide from steel without abrasives, useful as pre-treatment before color marking on weathered material
- Foot pedal input, job preview function, and fan that only runs during active engraving — the small-business production workflow details that distinguish a tool from a toy
Cons
- LightBurn setup requires loading a COR file and manually configuring galvo axis, Q-Pulse Width, and frequency settings — LightBurn forum (April 2026) shows new owners needing 30+ minutes before getting first correct results; not auto-detected
- No autofocus — manual Z-axis focus required for every workpiece height change; the B6 MOPA, ComMarker's current flagship, corrects this limitation
- B4 MOPA line is end-of-life inventory — ComMarker now promotes the B6 MOPA (autofocus, updated form factor, same 60W power); ASIN B0CGX9TBGQ remains on Amazon but community resources will increasingly reference the B6 going forward
- Color marking requires calibration per material batch — powder coat thickness and alloy composition vary even within the same tumbler brand, requiring fresh test grids for each new batch
- No enclosure — Class 4 open-beam 1064nm infrared; requires OD6+ eyewear at 60W and either ComMarker's Safety Enclosure Pro or a dedicated controlled workspace
ComMarker B6 20W Fiber Laser Engraver
Pros
- 150×150mm work area — 35% larger than the GWEIKE G2's 110mm field — fits tumblers on a rotary chuck and full knife blades without repositioning
- Autofocus eliminates manual Z-axis setup every session — the only 20W fiber laser with autofocus in the sub-$600 tier; every other machine in this range requires manual focus adjustment
- LightBurn confirmed working with EZCad also included — both workflows supported; buyers coming from diode lasers have immediate LightBurn continuity
- Built-in touchscreen display for settings and job status — removes the need to monitor a laptop during production runs
- 20W Raycus Q-switched marks steel, aluminum, brass, titanium, and copper consistently — ComMarker's production volume means quality control is verified across thousands of units
Cons
- Q-switched only — no color marking on stainless steel regardless of settings; for any color on tumblers or jewelry, the minimum step up is the OMTech 30W MOPA at $699
- No enclosure — Class 4 open-beam fiber laser; the invisible 1064nm infrared beam requires OD5+ eyewear and either a dedicated enclosure or a controlled workspace with no reflective surfaces
- Thinner community than GWEIKE — fewer Reddit threads and YouTube settings tutorials; troubleshooting depends more on ComMarker support channels than community knowledge
- Rotary not included — cylindrical tumbler marking requires a separate chuck or roller rotary attachment ($45–$65) on top of machine cost
Our Verdicts
ComMarker B4 60W JPT MOPA Fiber Laser
The ComMarker B4 60W MOPA earns the top rating because no other machine under $1,100 combines 60W JPT MOPA, LightBurn support, and a work area that handles tumblers. It is the benchmark for serious makers and small business operators. Two things to verify before buying: first, check whether ASIN B0CGX9TBGQ is in stock — the B4 line is end-of-life, and if both the B4 and B6 MOPA are available at similar prices, the B6's autofocus makes it the stronger long-term buy. Second, budget time for LightBurn setup — the COR file configuration takes an hour the first time. For experienced users who know what they are buying into, this remains the benchmark purchase under $1,100.
ComMarker B6 20W Fiber Laser Engraver
The ComMarker B6 is the correct 20W pick when work area matters more than color capability. The 150mm field covers tumblers (with a rotary), full knife blades, and medium plaques that would require repositioning on a 110mm machine. Autofocus and the built-in display are genuine workflow upgrades over competitors at this price. If color marking is any part of your future roadmap, skip this machine — the B6 is Q-switched, and adding color capability later means buying a second machine. Buy the OMTech 30W MOPA at $699 instead. For monochrome marking on larger pieces with the most features in this tier, the B6 is the pick.