At a Glance
Best For
Pros & Cons
Pros
- Two machines in one enclosure: 2W IR marks metal (steel, aluminum, brass), 10W diode cuts wood, leather, and acrylic — single $799 machine that eliminates owning both a fiber and a diode laser
- xTool Creative Space software is the most polished beginner interface in the laser category — camera positioning, guided material presets, and auto-layout workflows available from day one
- Fully enclosed with automatic safety shutoffs — the only machine in this tier safe to operate in an office, living room, or classroom without OD5+ eyewear and ventilation setup
- LightBurn compatible for users who want full parameter control beyond what xTool's software exposes
- xTool has the largest installed base and most active community of any Chinese laser brand — tutorial content, settings libraries, and troubleshooting threads for every use case are indexed and searchable
Cons
- 2W IR laser is NOT a fiber galvo — it produces lighter, less consistent marks on hard metal than a dedicated 20W fiber laser; an owner who ran both side by side measured the fiber as '25x faster on average for marking metal'
- IR laser head is the documented primary failure point — multiple owners report the IR head degrading or dying within 1–2 years of regular use; xTool support unable to repair in some markets
- No autofocus — autofocus is exclusive to the F1 Ultra; this model requires manual two-dot alignment each session (a common point of confusion because the F1 Ultra, a completely different machine, has autofocus)
- 110×110mm work area matches budget dedicated fiber lasers — tumblers require a rotary and repositioning, no advantage here over GWEIKE or ComMarker alternatives
- At $799 you are paying for the dual-laser concept and xTool brand polish, not metal marking throughput — a dedicated 30W fiber laser at the same price marks stainless 10–25x faster
xTool F1 Dual-Laser Engraver (2W IR + 10W Diode)
Prices may change · Free shipping with Prime
Our Verdict
The xTool F1 is worth buying if and only if you genuinely need both metal marking and non-metal work (wood, acrylic, leather) in a single safe, enclosed desktop machine. That value proposition is real and has no direct competitor. If your work is metal-only, the GWEIKE G2 Pro at the same $799 price marks stainless 10–25x faster with better depth. Two critical clarifications: the F1 original uses a 2W IR diode laser, not a fiber galvo, and has no autofocus — both of those features belong to the F1 Ultra, which is a completely different machine at a higher price. Compare them only if you understand the difference.
xTool F1 Dual-Laser Engraver (2W IR + 10W Diode)
$799
Prices may change · Free shipping with Prime
| Full Specifications | |
|---|---|
| Wattage | 2W |
| Laser Type | IR Diode (not fiber galvo) |
| Laser Source | xTool IR |
| Work Area (W) | 110mm |
| Work Area (H) | 110mm |
| Galvo Speed | 4000mm/s |
| Color Marking | No |
| LightBurn | Yes |
| Autofocus | No |
| Focal Length | 100mm |
| Weight | 2.5kg |
| Form Factor | desktop-enclosed |
| Software | xTool Creative Space + LightBurn |
| Pulse Width | N/A |
Compare With Similar Fiber Laser Engravers
Head-to-Head Comparisons
xTool F1 Dual-Laser Engraver (2W IR + 10W Diode)
$799
Prices may change · Free shipping with Prime