ComMarker B6 20W Fiber Laser Engraver vs GWEIKE G2 Pro 30W Fiber Laser Engraver
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
ComMarker
$599
GWEIKE
$799
Spec-by-Spec Comparison
| Spec | ComMarker B6 20W Fiber Laser Engraver | GWEIKE G2 Pro 30W Fiber Laser Engraver |
|---|---|---|
| Wattage | 20 W | 30 W |
| Laser Type | Q-Switched | Q-Switched |
| Laser Source | Raycus | Raycus |
| Work Area (W) | 150 mm | 150 mm |
| Work Area (H) | 150 mm | 150 mm |
| Galvo Speed | 8000 mm/s | 15000 mm/s |
| Color Marking | No | Yes |
| LightBurn | Yes | Yes |
| Autofocus | Yes | No |
| Weight | 3.5 kg | 6.5 kg |
| Software | LightBurn + EZCad | LightBurn + EZCad2 |
| Pulse Width | N/A (Q-Switched) | N/A (Q-Switched, 20–200kHz frequency range) |
| Price | $599 | $799 |
| Rating | 8.0/10 | 8.3/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
ComMarker B6 20W Fiber Laser Engraver
Pros
- 150×150mm work area — 35% larger than the GWEIKE G2's 110mm field — fits tumblers on a rotary chuck and full knife blades without repositioning
- Autofocus eliminates manual Z-axis setup every session — the only 20W fiber laser with autofocus in the sub-$600 tier; every other machine in this range requires manual focus adjustment
- LightBurn confirmed working with EZCad also included — both workflows supported; buyers coming from diode lasers have immediate LightBurn continuity
- Built-in touchscreen display for settings and job status — removes the need to monitor a laptop during production runs
- 20W Raycus Q-switched marks steel, aluminum, brass, titanium, and copper consistently — ComMarker's production volume means quality control is verified across thousands of units
Cons
- Q-switched only — no color marking on stainless steel regardless of settings; for any color on tumblers or jewelry, the minimum step up is the OMTech 30W MOPA at $699
- No enclosure — Class 4 open-beam fiber laser; the invisible 1064nm infrared beam requires OD5+ eyewear and either a dedicated enclosure or a controlled workspace with no reflective surfaces
- Thinner community than GWEIKE — fewer Reddit threads and YouTube settings tutorials; troubleshooting depends more on ComMarker support channels than community knowledge
- Rotary not included — cylindrical tumbler marking requires a separate chuck or roller rotary attachment ($45–$65) on top of machine cost
GWEIKE G2 Pro 30W Fiber Laser Engraver
Pros
- 15,000mm/s galvo speed — the fastest Q-switched fiber laser under $900 and 50% faster than the ComMarker B4 30W at $700; the throughput difference is measurable on production runs with any infill
- Wide 20–200kHz frequency range enables thermal oxidation color on stainless steel and titanium — GWEIKE documents '90+ colorful engravings' and DIY Life reviewer confirmed distinct greens and reds on stainless (Nov 2024)
- GWEIKE's LightBurn driver is the most actively maintained of any Chinese fiber laser brand — no COR file gymnastics, no galvo axis swap workarounds; direct native LightBurn galvo support out of box
- 150×150mm work area handles most knife blades, tumblers with rotary, and medium plaques without repositioning
- Active LightBurn settings ecosystem with documented community resources: a dedicated Etsy seller offers a 37-material LightBurn library specific to the G2 Pro 30W covering metals, plastics, and stone
Cons
- Color marking is thermal oxidation, not MOPA — results require experimentation per material and are less consistent and repeatable than a JPT MOPA machine; do not expect plug-and-play stainless color
- Focus height calibration is measured from lens center, not machine frame — GWEIKE's manual doesn't clarify this; every new owner mis-sets focus initially and must recalibrate by sound and burn quality (LightBurn forum, Feb 2026)
- Customer service is WhatsApp-only with inconsistent quality — best-lasercutter.com rates it 'a gamble'; not viable for production-critical environments with tight turnaround requirements
- Built-in fume extraction fan is insufficient for real engraving sessions — an external fume extractor ($80–$120) is a practical requirement, not an optional accessory
- Native G-Laser software is frustrating and feature-poor — nearly all users switch immediately to LightBurn; do not evaluate the machine on G-Laser
Our Verdicts
ComMarker B6 20W Fiber Laser Engraver
The ComMarker B6 is the correct 20W pick when work area matters more than color capability. The 150mm field covers tumblers (with a rotary), full knife blades, and medium plaques that would require repositioning on a 110mm machine. Autofocus and the built-in display are genuine workflow upgrades over competitors at this price. If color marking is any part of your future roadmap, skip this machine — the B6 is Q-switched, and adding color capability later means buying a second machine. Buy the OMTech 30W MOPA at $699 instead. For monochrome marking on larger pieces with the most features in this tier, the B6 is the pick.
GWEIKE G2 Pro 30W Fiber Laser Engraver
The GWEIKE G2 Pro is the fastest Q-switched fiber laser under $900 and the only machine in this price range that can produce visible thermal oxidation color on stainless steel without a MOPA source. The color is not MOPA-quality — it requires experimentation and is inconsistent batch-to-batch — but it exists, and nothing else at $799 can say the same. For deep engraving at maximum speed with color as a secondary capability, nothing competes. For consistent, repeatable color marking on tumblers or jewelry production, the OMTech 30W MOPA at $100 less is the more appropriate choice — it delivers true MOPA color repeatability that the G2 Pro's frequency tuning cannot match.