GWEIKE G2 Pro 30W Fiber Laser Engraver vs Monport 20W Fiber Laser Engraver
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
GWEIKE
$799
Monport
$349
Spec-by-Spec Comparison
| Spec | GWEIKE G2 Pro 30W Fiber Laser Engraver | Monport 20W Fiber Laser Engraver |
|---|---|---|
| Wattage | 30 W | 20 W |
| Laser Type | Q-Switched | Q-Switched |
| Laser Source | Raycus | Raycus |
| Work Area (W) | 150 mm | 110 mm |
| Work Area (H) | 150 mm | 110 mm |
| Galvo Speed | 15000 mm/s | 7000 mm/s |
| Color Marking | Yes | No |
| LightBurn | Yes | Yes |
| Autofocus | No | No |
| Weight | 6.5 kg | 3.2 kg |
| Software | LightBurn + EZCad2 | BSLcad + LightBurn (galvo license required separately) |
| Pulse Width | N/A (Q-Switched, 20–200kHz frequency range) | N/A (Q-Switched) |
| Price | $799 | $349 |
| Rating | 8.3/10 | 6.5/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
GWEIKE G2 Pro 30W Fiber Laser Engraver
Pros
- 15,000mm/s galvo speed — the fastest Q-switched fiber laser under $900 and 50% faster than the ComMarker B4 30W at $700; the throughput difference is measurable on production runs with any infill
- Wide 20–200kHz frequency range enables thermal oxidation color on stainless steel and titanium — GWEIKE documents '90+ colorful engravings' and DIY Life reviewer confirmed distinct greens and reds on stainless (Nov 2024)
- GWEIKE's LightBurn driver is the most actively maintained of any Chinese fiber laser brand — no COR file gymnastics, no galvo axis swap workarounds; direct native LightBurn galvo support out of box
- 150×150mm work area handles most knife blades, tumblers with rotary, and medium plaques without repositioning
- Active LightBurn settings ecosystem with documented community resources: a dedicated Etsy seller offers a 37-material LightBurn library specific to the G2 Pro 30W covering metals, plastics, and stone
Cons
- Color marking is thermal oxidation, not MOPA — results require experimentation per material and are less consistent and repeatable than a JPT MOPA machine; do not expect plug-and-play stainless color
- Focus height calibration is measured from lens center, not machine frame — GWEIKE's manual doesn't clarify this; every new owner mis-sets focus initially and must recalibrate by sound and burn quality (LightBurn forum, Feb 2026)
- Customer service is WhatsApp-only with inconsistent quality — best-lasercutter.com rates it 'a gamble'; not viable for production-critical environments with tight turnaround requirements
- Built-in fume extraction fan is insufficient for real engraving sessions — an external fume extractor ($80–$120) is a practical requirement, not an optional accessory
- Native G-Laser software is frustrating and feature-poor — nearly all users switch immediately to LightBurn; do not evaluate the machine on G-Laser
Monport 20W Fiber Laser Engraver
Pros
- BSLcad bundled with LightBurn galvo support confirmed — no EZCad-only lock-in at $349; the Amazon listing explicitly says 'LightBurn Compatible'
- Raycus 20W source marks stainless steel, aluminum, brass, titanium, copper, and anodized aluminum consistently — the same source family used in machines twice the price
- Q-switched monochrome marks are deep and durable — serial numbers, logos, and ID marks survive heavy daily use without fading or rubbing off
- 110×110mm work area covers rings, dog tags, knife blade sections, and metal business cards without repositioning
- 3.2kg form factor is genuinely portable — moves between bench and jobsite without fixed infrastructure or dedicated workspace
Cons
- LightBurn setup on the BSLFiber controller is poorly documented — LightBurn forum (Jan 2025) rated Monport's galvo setup instructions 'horrible'; expect troubleshooting before first successful job
- 10,000mm/s galvo speed trails the GWEIKE G2's 15,000mm/s at $150 more — the speed gap is noticeable on high-infill designs and compounds significantly on volume work
- No color marking — Q-switched fixed pulse width cannot produce oxidation colors on stainless steel regardless of settings or software
- No autofocus — manual Z-axis height setup required for every material change or thickness variation; a friction point that dedicated color-marking workflows cannot absorb
- BSLcad community resources are nearly nonexistent — unlike GWEIKE or OMTech, no active forum threads, settings libraries, or YouTube tutorials specific to BSLcad workflows
Our Verdicts
GWEIKE G2 Pro 30W Fiber Laser Engraver
The GWEIKE G2 Pro is the fastest Q-switched fiber laser under $900 and the only machine in this price range that can produce visible thermal oxidation color on stainless steel without a MOPA source. The color is not MOPA-quality — it requires experimentation and is inconsistent batch-to-batch — but it exists, and nothing else at $799 can say the same. For deep engraving at maximum speed with color as a secondary capability, nothing competes. For consistent, repeatable color marking on tumblers or jewelry production, the OMTech 30W MOPA at $100 less is the more appropriate choice — it delivers true MOPA color repeatability that the G2 Pro's frequency tuning cannot match.
Monport 20W Fiber Laser Engraver
The Monport 20W is the honest answer when the budget ceiling is $400 and the use case is basic metal marking. LightBurn is supported (the 'EZCad-only' framing in older reviews is outdated), the Raycus source is legitimate, and the machine marks metals cleanly. The real tradeoff is everything that matters for efficient daily use: the GWEIKE G2 20W at $150 more runs 50% faster, has dramatically better documentation, and has an active community that has already solved the problems you will encounter. If $349 is a genuine limit, this gets the job done. If it is not, pay the extra $150 for the G2.